OFT PUMPS - Officine di TreviOFT PUMPS - Officine di Trevi

Electric pumps

X251 – X351 – X501 – 800 – 1000

Three-phase 400 V submersible electric pumps for clean water and deep wells

X251-X351-X501-800-1000 Electric submersible pumps

Water supply from deep wells, civil and industrial raising systems, rain and running irrigation, fire fighting systems, aqueducts.

attach_fileTechnical data sheet
Learn moresouth
Request informationmail_outline
attach_fileData sheet
Learn moresouth
Request informationmail_outline
ATEX certification
No
Suitable for pumping
Water
Max temperature liquid to pump
Up to 30 °C
Type
6” submersible pump
ATEX certification
No
Suitable for pumping
Water
Max temperature liquid to pump
Up to 30 °C
Type
6” submersible pump
  • External pump case, delivery head, suction port, shaft in stainless steel.
  • X251-X351-X501 with impellers and stages in stainless steel, diffusers in special technopolymer.
  • 800-1000 with impellers and diffusers in special technopolymer, stages in stainless steel.
  • The check valve made of stainless steel is installed inside the delivery head.
  • Motor coupling meets NEMA standards.

  • 2 poles asynchronous motor, 50 Hz, 2850 rpm.
  • Class F insulation.
  • IP68 protection.
  • Working voltage: three-phase 400 V.

  • Pumped liquid: clean water, non aggressive, without solid particles.
  • The pump can not operate in dry conditions.
  • Pump body always completely submerged.
  • Temperature of pumped liquid: min 5°C – max 30°C.
  • Vertical operating position.
  • Max number of starts per hour: 20.

X251-X351-X501-800-1000 Electric submersible pumps

Share this product on:

  • External pump case, delivery head, suction port, shaft in stainless steel.
  • X251-X351-X501 with impellers and stages in stainless steel, diffusers in special technopolymer.
  • 800-1000 with impellers and diffusers in special technopolymer, stages in stainless steel.
  • The check valve made of stainless steel is installed inside the delivery head.
  • Motor coupling meets NEMA standards.
attach_fileScheda tecnica

  • 2 poles asynchronous motor, 50 Hz, 2850 rpm.
  • Class F insulation.
  • IP68 protection.
  • Working voltage: three-phase 400 V.

  • Pumped liquid: clean water, non aggressive, without solid particles.
  • The pump can not operate in dry conditions.
  • Pump body always completely submerged.
  • Temperature of pumped liquid: min 5°C – max 30°C.
  • Vertical operating position.
  • Max number of starts per hour: 20.

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up