You are here: / / / PT100 temperature probe

PT100 temperature probe

Application Fields

The electronic level transmitter is a piezo resistive pressure sensor that can be used in immersion for liquid level sensing and to give analogic signal to a control system. The transmitter has been developed to work matched with the Officine di Trevi pumps in hard conditions, to pump wastewater, leachate and viscous liquids, hydrocarbons. High measurement safety thanks to the maximum overload and vacuum resistance of the ceramic measuring cell. High utilization of the plant with allowed by the integrated overvoltage discharge. Multiple uses due to the robust execution of the housing and cable.

Category:

Description

PT100 temperature probe with connecting cable sheath 6 mm
ATEX II2 GD Ex ia iIC T6 (85 °C) Ex iaD 21 IP6X or non ATEX certified
• Protection sheath: stainless steel 316L, diameter 6×0,4 mm
• Probe: PT100 ceramics DIN IEC 751, simple ou double rolling up in assembly 3
wires
• Temperature of use ATEX version: -50/+250 °C (variable on the basis of cable
type)
• Temperature of use non-ATEX version: -50/+400 °C (variable on the basis of
cable type)
It is possible to buy the probe already equipped with the meters of cable necessary.

Technical Details
Request Information

Related products

Duplex electronic level transmitterTrasmettitore DuplexSeparator for electronic level transmitter