Electric pumps

ID Alpha EX – ID Beta EX

4’’ ATEX electric submersible borehole pumps for hydrocarbons in AISI 316 stainless steel with floating impellers for potentially explosive atmospheres

The ATEX submersible electric pumps for hydrocarbons ID ASTRA EX and ID VENERE EX represent a solution for the safe pumping of flammable and aggressive liquids in potentially explosive environments. Designed and manufactured in AISI 316 stainless steel, these explosion-proof submersible electric pumps ensure maximum chemical resistance, operational reliability, and regulatory compliance.

Certified in accordance with ATEX Directive 2014/34/EU, the pumps are suitable for installation in Zone 1 and Zone 2, where the highest level of safety against explosion risk is required. Their compact diameter of 105 mm makes them ideal for installation in vertical and inclined wells.

ATEX certification
Yes
Suitable for pumping
Hydrocarbons, Other liquids
Max temperature liquid to pump
Up to 40 °C
Type
4” submersible pump
  • Multistage centrifugal submersible electric pumps for 4″ wells
  • Outer casing, discharge outlet, suction inlet, shaft, and other components made of AISI 316 stainless steel
  • Impellers and diffusers made of special technopolymer with a ceramic insert at the wear point
  • Non-return valve made of AISI 316 stainless steel integrated into the pump head
  • Pumped liquid temperature: max. +40 °C
  • Special mechanical seal, particularly robust and reliable, with high resistance to wear and chemical attack

• 2-pole asynchronous motor
• RPM: 2850
• Frequency: 50 Hz
• Protection rating: IP68
• Operating voltage: single-phase 230 V, three-phase 400 V
• Duty: S1 – S4, 20 cycles/hour evenly distributed
• Oil-filled electric motor
• Electric motor protected by thermal switches, suitable for pumped liquid temperatures up to 40 °C
• Power cable to be selected according to the pumped liquid

• Pumping of aromatic hydrocarbons
• Pumping of aliphatic hydrocarbons
• Hydrocarbon condensates
• Landfill leachate contaminated with hydrocarbons
• Chemically aggressive liquids
• Water contaminated with hazardous substances
• Oil & Gas
• Landfills
• Hydraulic barriers

Installation example Installation example ID Alpha EX – ID Beta EX for hydrocarbons / Officine di Trevi
Installation example ID Alpha EX – ID Beta EX for hydrocarbons / Officine di Trevi

Share this product on:

  • Multistage centrifugal submersible electric pumps for 4″ wells
  • Outer casing, discharge outlet, suction inlet, shaft, and other components made of AISI 316 stainless steel
  • Impellers and diffusers made of special technopolymer with a ceramic insert at the wear point
  • Non-return valve made of AISI 316 stainless steel integrated into the pump head
  • Pumped liquid temperature: max. +40 °C
  • Special mechanical seal, particularly robust and reliable, with high resistance to wear and chemical attack

• 2-pole asynchronous motor
• RPM: 2850
• Frequency: 50 Hz
• Protection rating: IP68
• Operating voltage: single-phase 230 V, three-phase 400 V
• Duty: S1 – S4, 20 cycles/hour evenly distributed
• Oil-filled electric motor
• Electric motor protected by thermal switches, suitable for pumped liquid temperatures up to 40 °C
• Power cable to be selected according to the pumped liquid

• Pumping of aromatic hydrocarbons
• Pumping of aliphatic hydrocarbons
• Hydrocarbon condensates
• Landfill leachate contaminated with hydrocarbons
• Chemically aggressive liquids
• Water contaminated with hazardous substances
• Oil & Gas
• Landfills
• Hydraulic barriers

Esempio di istallazione Installation example ID Alpha EX – ID Beta EX for hydrocarbons / Officine di Trevi

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up