OFT PUMPS - Officine di TreviOFT PUMPS - Officine di Trevi

Electric pumps

BE 80 Derby

Electric submersible drainage pump for liquids up to 80 °C and contaminated fluids

Elettropompe BE per drenaggio di liquidi contaminati max 80 °C

The electric submersible drainage pump BE 80 DERBY is designed to operate with contaminated liquids up to 80 °C. It guarantees a maximum flow rate of up to 45 m³/h (750 l/min) and ensures high performances even under critical operating conditions.

Suitable for installation in tanks, reservoirs, wells, and sumps, the BE 80 DERBY model is specifically engineered for pumping aromatic hydrocarbons, aliphatic hydrocarbons, liquids contaminated by hydrocarbons, landfill leachate, process industrial water, biogas condensate and other particularly aggressive fluids.

attach_fileTechnical data sheet
Learn moresouth
Request informationmail_outline
attach_fileData sheet
Learn moresouth
Request informationmail_outline
ATEX certification
No
Suitable for pumping
Leachate, Hydrocarbons, Water, Other liquids
Max temperature liquid to pump
Up to 80 °C
Type
Submersible drainage pump
ATEX certification
No
Suitable for pumping
Leachate, Hydrocarbons, Water, Other liquids
Max temperature liquid to pump
Up to 80 °C
Type
Submersible drainage pump
  • Open impeller in cast iron to avoid obstruction from mud and other suspended small solids
  • Cast iron parts with galvanic treatment to increase its resistance
  • Motor case in stainless steel AISI 304
  • Motor shaft in stainless steel AISI 316
  • Temperature of the liquid to pump: up to 80 °C
  • Viton (FKM) seal
  • Outlet: 2″ female, GAS cylindrical
  • Single-phase version of the models: 50, 75, 100 and 150 with level regulator for automatic control available on request
  • The electric pump cannot be installed in potential explosive atmospheres
  • The electric pumps must operate completely submersed by the liquid to pump and never run in dry conditions

  • 2 poles asynchronous motor
  • RPM: 2850
  • Frequency: 50 Hz
  • Protection: IP 68
  • Insulation: class F
  • Working voltage: single-phase 230 V, three-phase 400 V
  • Duty: S1 – S4 20 c/h equally distributed
  • Oil filled electric motor
  • Motor protected by thermal switches resistant to temperatures of the pumped liquid up to 80 °C
  • Equipped with an electric cable resistant to liquid up to 80 °C and hydrocarbons

  • Oil & Gas
  • Chemical and petrochemical industry
  • Landfills
  • Geothermal
  • Biogas plants
  • Industrial plants
  • Pharmaceutical industry
  • Remediation of contaminated sites
  • Treatment of water contaminated by hydrocarbons

Installation example Installation example BE electric pumps for drainage of contaminated liquids up to 80 °C / Officine di Trevi
Elettropompe BE per drenaggio di liquidi contaminati max 80 °C

Share this product on:

  • Open impeller in cast iron to avoid obstruction from mud and other suspended small solids
  • Cast iron parts with galvanic treatment to increase its resistance
  • Motor case in stainless steel AISI 304
  • Motor shaft in stainless steel AISI 316
  • Temperature of the liquid to pump: up to 80 °C
  • Viton (FKM) seal
  • Outlet: 2″ female, GAS cylindrical
  • Single-phase version of the models: 50, 75, 100 and 150 with level regulator for automatic control available on request
  • The electric pump cannot be installed in potential explosive atmospheres
  • The electric pumps must operate completely submersed by the liquid to pump and never run in dry conditions
attach_fileScheda tecnica

  • 2 poles asynchronous motor
  • RPM: 2850
  • Frequency: 50 Hz
  • Protection: IP 68
  • Insulation: class F
  • Working voltage: single-phase 230 V, three-phase 400 V
  • Duty: S1 – S4 20 c/h equally distributed
  • Oil filled electric motor
  • Motor protected by thermal switches resistant to temperatures of the pumped liquid up to 80 °C
  • Equipped with an electric cable resistant to liquid up to 80 °C and hydrocarbons

  • Oil & Gas
  • Chemical and petrochemical industry
  • Landfills
  • Geothermal
  • Biogas plants
  • Industrial plants
  • Pharmaceutical industry
  • Remediation of contaminated sites
  • Treatment of water contaminated by hydrocarbons

Esempio di istallazione Installation example BE electric pumps for drainage of contaminated liquids up to 80 °C / Officine di Trevi

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up