You are here: / / / BE Drainage electric pumps for contaminated liquids max 50 °C
Drainage electric pumps for contaminated liquids max 50 °C

BE Drainage electric pumps for contaminated liquids max 50 °C

Application Fields

Pumping of charged liquid, leachate collection, raising from wells or tanks of contaminated liquid and landfill wastewater, condensation wells discharge, pumping of run-off water even contaminated and charged sewage.
The pumps can not be installed in potentially explosive atmospheres.

Category:

Description

  • Open impeller in cast iron to avoid the blockage due to charged liquid, landfill leachate and other small solid bodies.
  • Cast iron parts with galvanic treatment to increase its resistance.
  • Viton seals.
  • Shaft in AISI 316 stainless steel; motor case in AISI 304 (available on request in AISI 316).
  • Electric pumps produced with 5 m of SK 4G1,5 electric cable included.
  • 2 poles, asynchronous motor, 50 Hz, 2850 rpm.
  • Class F insulation.
  • IP68 protection.
  • Working voltage: single-phase 230 V, three-phase 400 V.
  • The electric motor is cooled by non-toxic, non-polluting liquid.
  • Motor protected by thermal switches resistant to temperatures up to 50 °C.

Additional information

Utilizzo

  • The pump can not operate in dry conditions.
  • Pump body always completely submerged.
  • Temperature of pumped liquid: min 0 °C – max 50 °C.
  • Frost free location.
  • Vertical operating position.
  • Maximum number of starts per hour: 20.
Technical Details
Request Information

Related products

BE 4″ electric pumps for contaminated liquids max 50 °C4″ electric pumps for contaminated liquids max 50 °CElettropompe 4 per liquidi contaminati max 80 CBE 4″ electric pumps for contaminated liquids max 80 °C