Electric pumps

Derby

Electric pump for drainage of wastewater and flooded environments

Emptying of rainwater wells, seepage and dirty water, draining of flooded areas.

ATEX certification
No
Suitable for pumping
Water
Max temperature liquid to pump
Up to 40 °C
Type
Submersible drainage pump
  • Open impeller in cast iron to eliminate obstruction from mud and other suspended small solids.
  • Single-phase version with capacitor connected inside the pump.
  • The pump is equipped with 5 m of electric cable H07RN-F.
  • Single-phase version with float switch for automatic control available on request.

  • 2 poles asynchronous motor, 50 Hz, 2850 rpm.
  • Class F insulation.
  • IP68 protection.
  • Working voltage: single-phase 230 V, three-phase 400 V.
  • The electric motor is cooled with a non-toxic, non-polluting liquid.

  • The pump can not operate in dry conditions.
  • Pump body always completely submerged.
  • Temperature of pumped liquid: min 5°C – max 40°C.
  • Vertical operating position.
  • Sump protected against freezing.
  • Maximum number of starts per hour: 20.

Share this product on:

  • Open impeller in cast iron to eliminate obstruction from mud and other suspended small solids.
  • Single-phase version with capacitor connected inside the pump.
  • The pump is equipped with 5 m of electric cable H07RN-F.
  • Single-phase version with float switch for automatic control available on request.

  • 2 poles asynchronous motor, 50 Hz, 2850 rpm.
  • Class F insulation.
  • IP68 protection.
  • Working voltage: single-phase 230 V, three-phase 400 V.
  • The electric motor is cooled with a non-toxic, non-polluting liquid.

  • The pump can not operate in dry conditions.
  • Pump body always completely submerged.
  • Temperature of pumped liquid: min 5°C – max 40°C.
  • Vertical operating position.
  • Sump protected against freezing.
  • Maximum number of starts per hour: 20.

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up