BE 80 316 Derby PRO

Electric submersible drainage pump completely in stainless steel AISI 316 with high manometric head for liquids up to 80 °C and contaminated fluids

The electric submersible drainage pump BE 80 316 DERBY PRO is designed to operate with contaminated liquids up to 80 °C. It guarantees a maximum manometric head of up to 34 meters (3,3 bar) and ensures high performances even under critical operating conditions.

Suitable for installation in tanks, reservoirs, wells, and sumps, the BE 80 316 DERBY PRO model is specifically engineered for pumping aromatic hydrocarbons, aliphatic hydrocarbons, liquids contaminated by hydrocarbons, landfill leachate, marine and brackish water, process industrial water, biogas condensate and other particularly aggressive fluids.

The construction materials in stainless steel AISI 316 allow high corrosion resistance and use in aggressive environments.

ATEX certification
No
Suitable for pumping
Leachate, Hydrocarbons, Water, Other liquids
Max temperature liquid to pump
Up to 80 °C
Type
Submersible drainage pump
  • Open impeller in stainless steel AISI 316 to avoid obstruction from mud and other suspended small solids
  • Pump body and other components in stainless steel AISI 316 resistant to aggressive environments
  • Temperature of the liquid to pump: up to 80 °C
  • Viton (FKM) seal
  • Outlet: 1″ 1/4 female, GAS cylindrical
  • Single-phase version of the model 151 with level regulator for automatic control available on request
  • The electric pump cannot be installed in potential explosive atmospheres
  • The electric pumps must operate completely submersed by the liquid to pump and never run in dry conditions

  • 2 poles asynchronous motor
  • RPM: 2850
  • Frequency: 50 Hz
  • Protection: IP 68
  • Insulation: class F
  • Working voltage: single-phase 230 V, three-phase 400 V
  • Duty: S1 – S4 20 c/h equally distributed
  • Oil filled electric motor
  • Motor protected by thermal switches resistant to temperatures of the pumped liquid up to 80 °C
  • Equipped with an electric cable resistant to liquid up to 80 °C and hydrocarbons

  • Oil & Gas
  • Chemical and petrochemical industry
  • Landfills
  • Geothermal
  • Biogas plants
  • Industrial plants
  • Pharmaceutical industry
  • Marine industry
  • Remediation of contaminated sites
  • Treatment of water contaminated by hydrocarbons

Installation example Installation example BE 80 316 Derby Pro / Officine di Trevi

Share this product on:

  • Open impeller in stainless steel AISI 316 to avoid obstruction from mud and other suspended small solids
  • Pump body and other components in stainless steel AISI 316 resistant to aggressive environments
  • Temperature of the liquid to pump: up to 80 °C
  • Viton (FKM) seal
  • Outlet: 1″ 1/4 female, GAS cylindrical
  • Single-phase version of the model 151 with level regulator for automatic control available on request
  • The electric pump cannot be installed in potential explosive atmospheres
  • The electric pumps must operate completely submersed by the liquid to pump and never run in dry conditions

  • 2 poles asynchronous motor
  • RPM: 2850
  • Frequency: 50 Hz
  • Protection: IP 68
  • Insulation: class F
  • Working voltage: single-phase 230 V, three-phase 400 V
  • Duty: S1 – S4 20 c/h equally distributed
  • Oil filled electric motor
  • Motor protected by thermal switches resistant to temperatures of the pumped liquid up to 80 °C
  • Equipped with an electric cable resistant to liquid up to 80 °C and hydrocarbons

  • Oil & Gas
  • Chemical and petrochemical industry
  • Landfills
  • Geothermal
  • Biogas plants
  • Industrial plants
  • Pharmaceutical industry
  • Marine industry
  • Remediation of contaminated sites
  • Treatment of water contaminated by hydrocarbons

Esempio di istallazione Installation example BE 80 316 Derby Pro / Officine di Trevi

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up