Electric pumps

All-in-One control panel with DISPLAY TOUCH SCREEN

All-in-One electrical control panel with 7″ touch screen display

The electric control panel is realized by Officine di Trevi to start our electric submersible pumps suitable for use in contaminated sites (ATEX certified and not). It must not be installed in potentially explosive atmospheres.

The control panel provides for the direct motor start and it is composed by following functions:

  • Visualization of operating parameters and status;
  • Display: LCD TFT touch screen 7”, 800×480 pixel, 65 k colors;
  • Visualization of pump’s details;
  • Possible interconnection of wells/tanks;
  • Swing level programmed for pump start;
  • Swing level programmed for stop pump;
  • Electrical absorption of motor;
  • Clock programming working cycles/stop;
  • Totalizer of working hours;
  • Alarm visualization: high and low level, manual panel, switch off with emergency button;
  • Versatility of the control panel for programming functions through the touch interface.

Working voltage: single-phase 230 V, three-phase 400 V.
Power supply: 50 Hz.

ACCESSORIES

  • n. 1 intrinsically safe module with ATEX supply circuit and galvanic insulation for the ATEX electronic level transmitter or ATEX level regulator;
  • n. 1 electronic level transmitter;
  • n. 1-2 level regulator
  • n. 1 flow switch;
  • n. 1 alarm delay for flow switch control.

Share this product on:

The control panel provides for the direct motor start and it is composed by following functions:

  • Visualization of operating parameters and status;
  • Display: LCD TFT touch screen 7”, 800×480 pixel, 65 k colors;
  • Visualization of pump’s details;
  • Possible interconnection of wells/tanks;
  • Swing level programmed for pump start;
  • Swing level programmed for stop pump;
  • Electrical absorption of motor;
  • Clock programming working cycles/stop;
  • Totalizer of working hours;
  • Alarm visualization: high and low level, manual panel, switch off with emergency button;
  • Versatility of the control panel for programming functions through the touch interface.

Working voltage: single-phase 230 V, three-phase 400 V.
Power supply: 50 Hz.

ACCESSORIES

  • n. 1 intrinsically safe module with ATEX supply circuit and galvanic insulation for the ATEX electronic level transmitter or ATEX level regulator;
  • n. 1 electronic level transmitter;
  • n. 1-2 level regulator
  • n. 1 flow switch;
  • n. 1 alarm delay for flow switch control.

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up