OFT PUMPS - Officine di TreviOFT PUMPS - Officine di Trevi

Electric pumps

99 BE Treinch

3” Electric submersible borehole pump in stainless steel AISI 316 with bottom suction for contaminated liquids

Elettropompe 3" con aspirazione da sotto per liquidi contaminati

The electric submersible borehole pump with a diameter of 76 mm 99 BE TREINCH made in stainless steel AISI 316 is designed to guarantee high performance and efficiency under critical operating conditions.

Suitable for installation in piezometers and wells with small diameter, the 99 BE TREINCH model is specifically engineered for sampling fluids in contaminated sites, pumping aromatic hydrocarbons, aliphatic hydrocarbons, marine and brackish water, groundwater and other particularly aggressive liquids.

The construction materials in stainless steel AISI 316 allow high corrosion resistance and use in aggressive environments.

attach_fileTechnical data sheet
Learn moresouth
Request informationmail_outline
attach_fileData sheet
Learn moresouth
Request informationmail_outline
ATEX certification
No
Suitable for pumping
Leachate, Hydrocarbons, Water, Other liquids
Max temperature liquid to pump
Up to 40 °C
Type
3” submersible pump
ATEX certification
No
Suitable for pumping
Leachate, Hydrocarbons, Water, Other liquids
Max temperature liquid to pump
Up to 40 °C
Type
3” submersible pump
  • Impellers and diffusers in special technopolymer wear resistant.
  • External pump case, delivery port, suction port, shaft and other components in stainless steel AISI 316
  • The check valve made of stainless steel AISI 316 is installed in the delivery head
  • Temperature of the liquid to pump: up to 40 °C
  • Viton (FKM) seal
  • Outlet: 1″ female, GAS cylindrical
  • The hydraulic part is located under the motor cooled externally by the pumped liquid
  • Electric pumps submerged for at least 15 cm provided that the pumps have been preloaded
  • The electric pump cannot be installed in potential explosive atmospheres

  • 2 poles asynchronous motor
  • RPM: 2850
  • Frequency: 50 Hz
  • Protection: IP 68
  • Insulation: class F
  • Working voltage: single-phase 230 V, three-phase 400 V
  • Duty: S1 – S4 20 c/h equally distributed
  • Oil filled electric motor
  • Motor protected by thermal switches resistant to temperatures of the pumped liquid up to 40 °C
  • Electric cable to combine according to the liquid to pump

  • Oil & Gas
  • Samplings
  • Chemical and petrochemical industry
  • Pharmaceutical industry
  • Marine industry
  • Treatment of water contaminated by hydrocarbons
  • Remediation of contaminated sites
  • Hydraulic barriers

Installation example Installation example 99 BE Treinch / Officine di Trevi
Elettropompe 3" con aspirazione da sotto per liquidi contaminati

Share this product on:

  • Impellers and diffusers in special technopolymer wear resistant.
  • External pump case, delivery port, suction port, shaft and other components in stainless steel AISI 316
  • The check valve made of stainless steel AISI 316 is installed in the delivery head
  • Temperature of the liquid to pump: up to 40 °C
  • Viton (FKM) seal
  • Outlet: 1″ female, GAS cylindrical
  • The hydraulic part is located under the motor cooled externally by the pumped liquid
  • Electric pumps submerged for at least 15 cm provided that the pumps have been preloaded
  • The electric pump cannot be installed in potential explosive atmospheres
attach_fileScheda tecnica

  • 2 poles asynchronous motor
  • RPM: 2850
  • Frequency: 50 Hz
  • Protection: IP 68
  • Insulation: class F
  • Working voltage: single-phase 230 V, three-phase 400 V
  • Duty: S1 – S4 20 c/h equally distributed
  • Oil filled electric motor
  • Motor protected by thermal switches resistant to temperatures of the pumped liquid up to 40 °C
  • Electric cable to combine according to the liquid to pump

  • Oil & Gas
  • Samplings
  • Chemical and petrochemical industry
  • Pharmaceutical industry
  • Marine industry
  • Treatment of water contaminated by hydrocarbons
  • Remediation of contaminated sites
  • Hydraulic barriers

Esempio di istallazione Installation example 99 BE Treinch / Officine di Trevi

Share this product on:

Would you like more information about this product?

Fill out the contact form

    keyboard_arrow_up